Filter Systems
Plastic Recycling Lines

Filter systems are recommended depending on the extruder capacity. There are filter types, namely, single-way and double-way. In the systems with double-way, the filter can be replaced without switching off the machine. If desired, pressure sensor is also installed for automatically controlled replacement. The filter systems shown in the figure are of round section and have field of application for service life. There are also rectangular-section filter systems available. 

Technical Specifications:

Single Way 

Al One Filter diameter (mm) Filter area (cm2) Capacity (kg/h) 
Al One 10 75 1x45 60-100
Al One 15 95 1x72 80-150
Al One 20 115 1x105 100-250
Al One 25 125 1x122 150-400
 
 

Double Way 

Al Two Filter diameter (mm) Filter area (cm2) Capacity (kg/h) 
Al Two 10 58 2x27 40-100
Al Two 15 76 2x45 80-120
Al Two 20 95 2x72 100-200
Al Two 25 115 2x105 150-350
Al Two 30 125 2x122 200-500
< Prev   Next >
 
Sanayi Mah. Başaklı Sk. (Ozan Sk) No:19 Güngören / İstanbul
Tel : 0212 505 22 73 - 74 Fax: 0212 505 22 39
Minimedya